Amiga Hardware Database Expansion cards



AT 500 Megabody Manual Photo Software
Company
M-Tec, Germany
 Date
1992
 Amiga
A500
 Interface
68000 socket
 Autoconfig ID
2192 / 1
    IDE controller
  • connects to the 68000's socket, the 68000 is replaced onto the board
  • 44 pin IDE header for connecting an internal 2.5" hard disk drive
  • autoboot ROM - autobooting requires at least Kickstart 1.3
  • autoboot disable jumper
  • hard disk activity LED connector
  • feature connector for the optional memory expansion
  • disable switch
  • RDB compatible
    notes
  • fits into the CDTV without problems
  • autobooting is problematic with the CDTV - either a boot floppy has to be used (which a bare CDTV lacks), or after a reset by selecting the hard disk in the Early Startup Menu (which require at least Kickstart 2.0)
  • it's also possible to enable autoboot by disabling the CD-ROM drive, which is done by removing jumper 15 (this generally disables the CDTV boot EPROMs)

    Photo
    M-Tec AT 500 Megabody -  front side
    front side

    M-Tec AT 500 Megabody -  back side
    back side




About Search Links