Amiga Hardware Database Expansion cards



AT-Bus 2008 Manual Photo Software
Company
BSC / Alfa Data, Germany
 Date
1992
 Amiga
A2000, A3000, A4000
 Interface
Zorro II
 Autoconfig ID
2049 / 6
2092 / 6
    IDE controller
  • the board is basically the combination of the A.L.F. IDE controller and the MemoryMaster memory expansion cards
  • uses polled I/O, not DMA transfer
  • RDB compatible
  • 40 pin internal IDE header
  • place for a 3.5" hard disk on the card
  • delivered with A.L.F. 2 driver software
  • during transfers the high and low bytes are swapped as the A600/A1200/A4000 and PCs do so the drives formatted with them can be handled by the AT-Bus 2008
  • hard disk activity LED connector
    memory
  • sixteen ZIP sockets accept 8 MB RAM
  • supports either static column or page mode ZIPs
  • accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
  • RAM and HD can be disabled separately by jumper

    Photo
    BSC / Alfa Data AT-Bus 2008 -  front side
    front side

    BSC / Alfa Data AT-Bus 2008 -  front side
    front side

    BSC / Alfa Data AT-Bus 2008 -  back side
    back side

    BSC / Alfa Data AT-Bus 2008 -  back side
    back side

    Manual
    BSC-HD.pdf (443 kB)
    Controller Hardware and Software Installation Manual (english/german)
     




About Search Links