Amiga Hardware Database Expansion cards



CyberVision PPC Manual Photo Software
Company
Phase 5 Digital Products, Germany
 Date
1998
 Amiga
A3000, A4000
 Interface
CyberStorm PPC
 Autoconfig ID
8512 / 68
    RTG graphics card
  • 3D Labs & Texas Instruments: Permedia 2
    • 230 MHz RAMDAC
    • 24 bit resolutions can be packed to achieve higher refresh rates and less memory usage but slows down graphics operations
    • 145 MHz dot clock in 24 bit packed pixel modes
    • 100 MHz in 32 bit modes
    • 80 million textured 3D pixels per second
    • hardware accelerated rendering functions: z-buffering, gouraud shading, fogging, blending, antialiasing
    • support for color space conversion, chroma keying, XY scaling
  • 25 MHz local PCI bus
  • 8 MB 64 bit wide SGRAM
    screen modes
  • programmable resolutions
  • no support for interlace screen modes
  • 1280×1024×32 non-interlace
  • 1600×1200×24 non-interlace
    notes
  • rev 1.0 boards has only one edge connector for vertical mounting on the CPU board - it cannot be used with CyberStorm PPCs fitted in an A3000 because of the limited space
  • rev 1.1 boards has two edge connectors for horizontal and vertical mounting
  • the CPU board requires a flash ROM update
  • a 10 pin shielded ribbon cable leads to the two external connectors
    • 15 pin DSUB
    • 3 pin mini DIN for use with an optional shutter glasses system (mounted only on rev 1.1 boards)
  • no integrated passthrough option - an external monitor switch is required in order to use an existing scan doubler for the native screen modes
  • no support for draggable screens
  • CyberGraphX 3, 4 drivers
  • supported by Linux

    Photo
    Phase 5 Digital Products CyberVision PPC -  front side
    front side

    Phase 5 Digital Products CyberVision PPC -  front side
    front side

    Phase 5 Digital Products CyberVision PPC -  back side
    back side

    Phase 5 Digital Products CyberVision PPC -  back side
    back side




About Search Links