Amiga Hardware Database Expansion cards



Golem SCSI II (A500) Photo Software
Company
Kupke, Germany
 Date
1990
 Amiga
A500
 Interface
side expansion port
 Autoconfig ID
2073 / 2
    SCSI 2 controller
  • RDB compatible
  • uses polled I/O instead of DMA transfers
  • autoboot ROM - autobooting requires at least Kickstart 1.3
  • 50 pin internal SCSI header
  • DB25 external connector
  • place for a 3.5" hard disk inside the case
  • hard disk activity LED
  • disable switch
    optional memory board - Golem RAM-Card 500
  • 64 DIP sockets accept 2, 4 or 8 MB RAM
  • takes 1×1M DIPs
  • 32 of the 64 DIP sockets are on a daughterboard
  • takes away the space from the internal hard disk
    optional processor board - Golem 68030
  • 68030 @ 14 MHz
  • optional FPU
  • 32 DIP sockets for up to 16 MB RAM
  • takes 256k×4 or 1M×4 chips
  • leaves no space for the internal hard disk
    notes
  • connects to the side expansion port, has passthrough connector
  • built-in Kickstart switcher with 5 ROM sockets

    Photo
    Kupke Golem SCSI II (A500) - Memory daughterboard front side
    Memory daughterboard, front side

    Kupke Golem SCSI II (A500) - Memory daughterboard back side
    Memory daughterboard, back side

    Kupke Golem SCSI II (A500) - Main board front side
    Main board, front side

    Kupke Golem SCSI II (A500) - Main board back side
    Main board, back side




About Search Links