Amiga Hardware Database Expansion cards



Hypercom Plus Photo Software
Company
VMC Harald Frank, Germany
 Date
1998
 Amiga
A1200
A2000, A3000, A4000
 
-
-
Interface
clock port
Zorro II
 Autoconfig ID
5001 / 6,7
    serial and parallel interfaces
  • Hypercom 3 Plus
    • available in both Zorro II and clock port versions
    • the latter connects directly to the 26 pin expansion port of Buddha/Catweasel or connects with a cable to A1200's clock port
    • the Zorro II version is based on the HyperCom 4 Plus, it uses the same PCB
    • Exar 16C552 UART chip
    • one DB25 bidirectional parallel port with 500 kB/s transfer speed
    • one DB9 and one DB25 RS232 serial port with up to 460800 bps transfer speed
    • 32 byte FIFO buffer (16 byte receive, 16 byte send)
    • not compatible with Mikronik towers
    • supported by NetBSD
  • Hypercom 3 Tel
    • expansion module for the ISDN Blaster
    • Exar 16C552 UART chip
    • two DB25 460800 bps buffered serial ports
    • one DB25 500 kB/s buffered bidirectional parallel port
    • one handset connector
    • 32 byte FIFO buffer (16 byte receive, 16 byte send)
  • Hypercom 4 Plus
    • Zorro II
    • two Exar 16C552 UART chips
    • four DB25 or DB9 RS232 serial ports with up to 460800 bps transfer speed
    • two DB25 500 kB/s buffered bidirectional parallel ports
    • 32 byte FIFO buffer (16 byte receive, 16 byte send)
    • up to five Hypercom 4 can be installed into one Amiga
    • supported by NetBSD

    Photo
    VMC Harald Frank Hypercom Plus - Zorro II version back side
    Zorro II version, back side

    VMC Harald Frank Hypercom Plus - Clock port version front side
    Clock port version, front side

    VMC Harald Frank Hypercom Plus - Clock port version back side
    Clock port version, back side

    VMC Harald Frank Hypercom Plus - Zorro II version back side
    Zorro II version, back side




About Search Links