Amiga Hardware Database Expansion cards



MegaMix 500 Photo
Company
3-State, Germany
 Date
1992
 Amiga
A500
 Interface
side expansion port
 Autoconfig ID
512 / 2
  • external RAM expansion
  • possible configurations are 2, 4, 6 or 8 MB
  • consists of three boards: mainboard, controller daughterboard and one of three different RAM daughterboards
  • mainboard holds the controller daughterboard and the RAM daughterboards
  • passthrough connector
  • RAM daughterboards work also in the Apollo 500AT
  • disable switch
    RAM daughterboard - Type 1
  • ZIP RAM sockets
  • takes up to up to 8 MB RAM
    RAM daughterboard - Type 2
  • sixteen 22 pin SIP sockets
  • 128 kB (256k×4) SIPs
  • takes up to 2 MB RAM
    RAM daughterboard - Type 3
  • 64 256k×1 DIP chips, soldered to three stacked boards
  • 2 MB RAM (not expandable)

    Photo
    3-State MegaMix 500 - Main board front side
    Main board, front side

    3-State MegaMix 500 - Main board back side
    Main board, back side

    3-State MegaMix 500 - Exterior front side
    Exterior, front side

    3-State MegaMix 500 - Exterior rear side
    Exterior, rear side

    3-State MegaMix 500 - Control card front side
    Control card, front side

    3-State MegaMix 500 - Control card back side
    Control card, back side

    3-State MegaMix 500 - RAM card front side
    RAM card, front side

    3-State MegaMix 500 - RAM card back side
    RAM card, back side




About Search Links