Amiga Hardware Database Expansion cards



MultiFaceCard 2 / MultiFaceCard 2+ Manual Photo Software
Company
BSC, Germany
 Date
1991
 Amiga
A2000, A3000, A4000
 Interface
Zorro II
 Autoconfig ID
2092 / 17
    serial and parallel interface
  • two serial ports controlled by 68681
  • two parallel ports controlled by 68230
  • 75, 110, 134.5, 150, 300, 600, 1200, 2000, 2400, 4800, 7800, 9600, 19200, 57600 bps serial transfer rates
  • the 31250 bps MIDI rate is supported only when the 3.686 MHz oscillator is replaced by 4 MHz - this disables the higher bitrates (57600, 33600, 19200)
  • half length card - four ribbon cables connect to the two slot covers
  • both slot covers carry a DB9 serial port and a DB25 parallel port
  • serial ports are supported by NetBSD
  • disable jumper
  • supported by OpenBSD
    MultiFaceCard 2+
  • uses 7,3728 MHz oscillator instead of 3.686 MHz thus offering 76800 and 115200 bps serial rates
  • MFS3 software
  • the MultiFaceCard 2 can be simply upgraded to 2+ with the new oscillator and software

    Photo
    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 7 front side
    Rev 7, front side

    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 6 front side
    Rev 6, front side

    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 6 back side
    Rev 6, back side

    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 6 front side
    Rev 6, front side

    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 7 front side
    Rev 7, front side

    BSC MultiFaceCard 2 / MultiFaceCard 2+ - Rev 7 back side
    Rev 7, back side




About Search Links