Amiga Hardware Database Expansion cards



Phönix-Turbo II & Phönix-Turbo FE Manual Photo
AIBB
Company
Georg Braun, Germany
 Date
2005
 Amiga
A1000
 Interface
Phoenix
 Autoconfig ID
5012 / 11
5012 / 12
  • accelerator for the Phoenix A1000 motherboard
    processor
  • 68030 / 68EC030 @ 32 / 40 MHz, PGA
  • 68882 @ 32 / 40 MHz, PGA
    memory
  • 4 MB 32 bit SRAM
  • RAM access in 3 clock cycles but no support for burst mode
  • memory can be autoconfigured in the 24 bit address space or mounted in the 32 bit address space using AddMem
    notes
  • Phönix-Turbo II is a do it yourself project - everything needed to build the board (layout and PLD / GAL files) is available on the author's website
  • Phönix-Turbo-FE is essentially the same card, but available as a complete product with additional 512 kB Flash memory
  • connects into the 96 pin DIN connector on the Phoenix motherboard
  • no 68000 fallback mode

    Photo
    Georg Braun Phönix-Turbo II & Phönix-Turbo FE - Phönix-Turbo II  front side
    Phönix-Turbo II, front side

    Georg Braun Phönix-Turbo II & Phönix-Turbo FE - Phönix-Turbo II  back side
    Phönix-Turbo II, back side

    Georg Braun Phönix-Turbo II & Phönix-Turbo FE - Phönix-Turbo FE  front side
    Phönix-Turbo FE, front side

    Manual
    ph_turbo.zip (217 kB)
    Phönix-Turbo II schematics, board layout, CPLD JEDEC files
      Georg Braun
    ph_turbo_fe.zip (707 kB)
    Phönix-Turbo FE user manual, schematics, board layout, CPLD JEDEC files
      Georg Braun



About Search Links