Amiga Hardware Database Expansion cards



WildFire Manual Photo Software
AIBB
Company
DKB, USA
 Date
1996
 Amiga
A2000
 Interface
CPU slot
 Autoconfig ID
2012 / 23,255
    processor
  • 68060 @ 50 MHz
    memory
  • four 72 pin SIMM sockets accept 128 MB RAM
  • supports 4, 8, 16, 32 MB SIMMs, 60-80 ns
  • 64 bit interleaved RAM access if identical SIMMs are installed in alternate banks (U312 / U314 and U313 / U315)
  • only SIMMs with 1K refresh rate are supported (SIMMs with 4K refresh rate don't work)
    Fast SCSI 2 controller
  • 10 MB/s max transfer speed
  • 50 pin internal header
  • 50 pin external high density connector
  • uses wildfirescsi.device
    Ethernet
  • DEC Tulip 21040, the only Ethernet controller in Amigas that DMAs directly into fast 32 bit memory
  • up to 100 Mb/s transfer speed
  • 10Base-T connector
  • internal slot for the optional 10Base-2 connector
  • has SANA II, but no MNI driver
    notes
  • works only with Kickstart 3.x
  • flash ROM for firmware upgrades
  • two PCI bus slots (one for the Inferno graphics board)
  • JP104 jumper setting: ON = 70 or 80ns / OFF = 60ns (all other jumpers are reserved)
  • configuration screen can be activated by holding right mouse button during startup

    Photo
    DKB WildFire -  front side
    front side

    DKB WildFire -  back side
    back side




About Search Links